liveBook · Manning

Chapter 6: A CHIP-8 interpreter

What you will learn in chapter 6 of Systems Programming with Zig

The chapter introduces CHIP-8 as an interpreter project, explains why building interpreters is valuable, and defines bytecode.

After this chapter you will be able to

What it builds on

Section by section

Introduction

The chapter introduces CHIP-8 as an interpreter project, explains why building interpreters is valuable, and defines bytecode.

Key terms: bytecode, interpreter, instruction, interpreters, structuring complicated data, abstracting away messy constraints

6.1 Let’s put you to work

The section shifts the CHIP-8 project toward reader-written code and explains why the book will provide guidance rather than every line of implementation.

Key terms: architecture, test suite, reference code

6.1.1 Testing with Zig

Explains why interpreters are well suited to testing and how the chapter’s tests will check the CHIP-8 implementation.

Key terms: well-defined, specific, deterministic, interpreter, test suite, end-to-end testing, instructions, results

6.1.2 So how do you actually write tests?

This section explains how Zig tests succeed or fail, how to run them, and which standard-library assertions to use.

Key terms: test syntax, error, zig test, stack trace, build.zig, std.testing, std.testing.expect, std.testing.expectEqual, std.testing.expectEqualSlices, std.testing.expectEqualStrings

6.2 Wait — what is a bytecode interpreter?

Introduces the virtual machine as an abstract environment for programs and distinguishes interpreters from emulators.

Key terms: virtual machine, virtual interfaces, interpreter, emulator, memory, devices

6.2.1 Examining CHIP-8’s design

This section describes CHIP-8’s small machine environment, its input and display devices, and the two-byte form of its instructions.

Key terms: 8-bit variables, 12-bit register, memory, COSMAC VIP, hexadecimal keypad, 64-by-32 black-and-white display, instruction set, opcode, operands

6.3 Measure twice, cut once

This section introduces the plan to scaffold the CHIP-8 interpreter with software and data-oriented principles in mind.

6.3.1 Maximizing modularity

The section separates the CHIP-8 VM from its interactive runtime and shows how Zig modules and composable build steps support testing that design.

Key terms: CHIP-8 VM, interactive runtime, separation of concerns, modules, root source file, interfaces, addImport, @import("vm"), build.zig, build steps

6.3.2 Simplifying with structures

This section divides CHIP-8 state into display, keypad, and CPU-and-memory structures, then explains their representations and limited initialization needs.

Key terms: CHIP-8 virtual machine, I register, program counter, pc, Display, u1, keypad, bool, initialization, memory

6.3.3 On your mark, get ready, load and step!

This section scaffolds the interpreter’s step operation and program loading, then identifies the interface that tests will use.

Key terms: step, readBytes, two-byte instruction, pc, 0x200, writeBytes, @memcpy, pre-baked tests, functions and data structures, surface area

6.3.4 How do you design programs?

This section explains how a data-first, modular approach kept the CHIP-8 interpreter’s architecture simple without unnecessary abstractions.

Key terms: data-oriented design, modular thinking, abstraction

6.4 Devices for the desktop

This section explains why the CHIP-8 application needs desktop display and keyboard support and introduces Raylib as a C library that Zig can use for it.

Key terms: CHIP-8, Raylib, graphical display, keyboard, C libraries

6.4.1 Building with new blocks

This section adds Raylib as a Zig project dependency and connects it to the desktop runtime build.

Key terms: canonical source, zig fetch, build.zig.zon, dependencies, hashes, ZON, struct literals, enum literals, std.Build.dependency, artifact

6.4.2 Hello, Window!

This section explains how Zig uses Raylib’s C interface to create a window and why a Raylib application uses a frame-by-frame loop.

Key terms: Raylib, application framework, core application loop, @cImport, @cInclude, @cDefine, C header files, C macros, frame-by-frame loop, real-time

6.4.3 Interactivity

This section connects a modern keyboard to the CHIP-8 keypad and uses Raylib rectangles to show keypad activity and display pixels.

Key terms: COSMAC VIP, IsKeyPressed, vm.Keypad, DrawRectangle, WHITE, display pixel

6.4.4 Running the runtime

The section connects CHIP-8 bytecode to the runtime loop and explains how to use the runtime while instruction implementation is still incomplete.

Key terms: Memory, Random, bytecode, step, keypad, display, tests, runtime, instruction set

6.5 Time to DIY

Introduces the hands-on CHIP-8 instruction work and encourages readers to make their own implementation choices.

6.5.1 Twiddling bits, not thumbs

Introduces the bit-level view needed to work with CHIP-8 instructions, especially splitting two-byte instructions into nibbles.

Key terms: CHIP-8 bytecode, nibbles, bit shifting, truncate, 12-bit addresses

6.5.2 Understanding my guide

This section explains the four-nibble notation used to describe CHIP-8 instructions and their parameters.

Key terms: nibble, hexadecimal, 6XKK, register X, constant byte KK

6.5.3 Decoding, nibble by nibble

The section introduces decoding CHIP-8 instructions by their first nibble, illustrates two address-based instructions, and recommends keeping instruction behavior in one organized switch statement.

Key terms: first nibble, AMMM, I register, MMM, 1MMM, program counter, switch statement, interpreter behavior

6.5.4 Register instructions and overflow operators

This section explains several CHIP-8 register instructions and the Zig operations needed to implement wrapping arithmetic, overflow checks, instruction decoding, and masked random values.

Key terms: 6XKK, register X, KK, wrapping add, +%, -%, *%, @addWithOverflow, @subWithOverflow, @mulWithOverflow

6.5.5 Skipping around

Explains how CHIP-8 uses conditional skips and unconditional jumps to branch and emulate an if statement.

Key terms: branching, skip instructions, register values, program counter, unconditional jump instruction, 1MMM, if statements

6.5.6 Power up the stack

This section explains CHIP-8 subroutine calls and returns, including their instructions, stack storage, and use of registers to pass results.

Key terms: call stack, 2MMM, 00EE, return, stack pointer, program counter, Memory, loadProgram, registers, subroutine

6.5.7 Inputting and outputting

This section explains how CHIP-8 keypad input, display clearing, and sprite drawing interact with the virtual machine.

Key terms: FX0A, register X, program counter, Keypad, 00E0, clearDisplay, Display, DXYN, I, register Y

6.5.8 Writing things

This section explains how CHIP-8 programs use font data, FX29, and FX33 to display digits, and why font data must be kept clear of a growing stack.

Key terms: FX29, low nibble, I register, font data, font offset, FX33, DXYN, decimal digits, stack overflow, stack pointer

6.5.9 Saving state

Explains how CHIP-8’s FX55 and FX65 instructions save and restore registers through memory at I, and why that is useful.

Key terms: FX55, FX65, registers 0 to X, I, call instruction, program counter, FX33

6.5.10 Ticking along

This section adds CHIP-8’s delay and sound timers to the interpreter and connects the sound timer to audio playback.

Key terms: delay timer, sound timer, step, runtime, Memory struct, Raylib, audio system, FX15, FX07, FX18

6.6 Wait — tell me again what this interpreter is for?

The section explains why building a CHIP-8 interpreter can change how a programmer thinks about computing.

Key terms: interpreters, instruction sets, CHIP-8, systems programming

6.7 Next steps

Suggests ways to extend the completed CHIP-8 interpreter and its barebones Raylib runtime.

6.8 Summary

Concepts explained in this chapter

← Chapter 5: A fabulous FFI cookbook Chapter 7: The baroque world of computer graphics →

These guides are generated from the text of Manning books by Manning's knowledge graph and link to the sections they draw on. The full books are available on liveBook and at manning.com.