LED Circuit

An LED circuit is a fundamental electronic circuit that is used to power a Light Emitting Diode (LED). It typically consists of an LED, a resistor to limit the current, and a power source. This simple circuit can be easily constructed on a breadboard, which is ideal for prototyping and testing.

Components of an LED Circuit

  1. LED (Light Emitting Diode): The primary component that emits light when current flows through it.
  2. Resistor: Used to limit the current flowing through the LED to prevent it from burning out. The value of the resistor is crucial and depends on the supply voltage and the LED's forward voltage.
  3. Power Source: Provides the necessary voltage and current for the circuit. Common power sources include batteries or power supplies.

Building an LED Circuit

When building an LED circuit, it is important to consider the supply voltage and the forward voltage of the LED. For example, if you are using a microcontroller like the Arduino Uno, which operates at 5.5 V, you will need to calculate the appropriate resistor value to ensure the LED receives the correct current.

Adjusting for Different Supply Voltages

When using different devices, such as the Tessel, which operates at 3.3 V, adjustments need to be made to the circuit. Specifically, the current-limiting resistor must be recalculated to accommodate the different supply voltage. This ensures that the LED operates safely and efficiently.

Figure 8.5. The original basic LED circuit for the Uno. The Uno operates at 5.5 V, whereas the Tessel is a 3.3 V device. The circuit needs to be adjusted for the different voltage of the Tessel. Figure 8.5. The original basic LED circuit for the Uno. The Uno operates at 5.5 V, whereas the Tessel is a 3.3 V device. The circuit needs to be adjusted for the different voltage of the Tessel.

In previous projects, calculations were made to determine the necessary resistor value by considering the operating voltage of the device and the forward voltage of the LED. For instance, with the Uno's 5 V supply and an LED forward voltage of approximately 1.8 V, a specific resistor value was calculated to ensure proper operation. Similar calculations must be performed when using other devices with different supply voltages, such as the Tessel.

FAQ (Frequently asked questions)

Where can you build a simple LED circuit for prototyping?