liveBook · Manning

5 ghz band

As explained in Acing the CCNA Exam: Volume 2 Advanced Networking and Security

The 5 GHz band is the portion of the radio spectrum centered around 5 gigahertz that is used by wireless networking technologies.

The 5 GHz band is a wireless LAN radio-frequency range of approximately 5.150–5.895 GHz, with exact limits depending on the country. Compared with 2.4 GHz, it generally offers higher data rates and less congestion but is more affected by walls and other obstacles. section 18.2.2 section 18.5

Key operational characteristics include:

  • Uses non-overlapping channels when configured at the standard 20 MHz width, simplifying channel selection. section 18.5
  • Combines 20 MHz channels into 40, 80, or 160 MHz channels to support higher data-transfer rates, at the cost of fewer available channels. section 18.2.2 section 18.5
  • Supports wireless LAN standards including 802.11a, 802.11n, 802.11ac, and 802.11ax, while 802.11be also supports 5 GHz. section 18.5
Figure 18.11 Channels in the 5 GHz band. Twenty MHz channels can be combined into wider channels of 40, 80, or 160 MHz to support greater data transfer rates.

Compare the 20 MHz 5 GHz channels with their 40, 80, and 160 MHz combined-channel options. section 18.2.2

How Acing the CCNA Exam: Volume 2 Advanced Networking and Security covers it

How deep it goes
Explains the approximate range, interference characteristics, channel widths, and standards, but does not provide device-specific configuration commands.
Examples
Uses 20, 40, 80, and 160 MHz channel configurations and identifies 802.11a, 802.11ac, and 802.11ax as 5 GHz standards.
What it assumes
Defines radio frequency, bands, channels, frequency, and channel width before comparing wireless LAN bands.
What you can do after
Evaluate 5 GHz channel choices by balancing channel width, data rate, available channels, congestion, and obstacle absorption.
How it connects
Links RF, wireless LANs, channels, the 2.4 GHz band, the 6 GHz band, and 802.11 standards.

Related concepts

This explainer was generated by Manning's knowledge graph from the text of Acing the CCNA Exam: Volume 2 Advanced Networking and Security. The section links point to the parts of the book it draws on.